Trip 83 - Wednesday Evening - May 11th

TIme to strip parts off the engine, and paint it. I also went to Lake City to set the tanks in one last and final time to see -exactly- where to put the outlets for the new holding tank, and to relocate an outlet for the water tank.

 

Made an Image of Record for the wiring of the starter solenoid. Then, I do not have to figure it out once again.

 

Now, wash it down with lacquer thinner and paint it blue and the shiny stuff clear lacquer. Plus alotta parts too.

 

Along the side of the water tank where the vent hose will be located. The hull is to the left, the surface of the VBerth on top and the oval is where the outlet will be located. Plenty of room.

 

Plenty of room here too for the new location for the water outlet under the tank.

 

Plenty of room under the holding tank for the water line to sneak under there.

 

The previous location for the elbow and pipe will be just fine once again. I am debating whether to run a single piece of hose, or use Pvc tubing with sewer connectors.

 

Back to Woodbury ...

Later ...