The Domer - A Bit More Progress

Time to screw this thing down to the deck.

I measured the front and back, and centered the front door panel and back panel to that centre. Then, each side and nudged it from left to right until centre'd there too.

Then, time to screw in down. I could have used lag bolts but, felt some deck screws were good enough. Especially when drilled at an angle. And three per Panel.

 

Countersunk and ready for the screws. Three per Panel.

 

A night image.

 

Inside.

 

When the temp went back up to the high twenties, the Domer settled right down to the Upper Ring as it should have.

 

And, in the cloudy day we call "Daylight". That should be "Cloudlight" instead.

(To be continued)